Fertilizer & Nutrition

Foliar Feeding Might Help But Your Plants Still Need More

It’s the early 1950’s and we are in the greenhouse laboratories of Michigan State University’s Department of Horticulture. Enter Dr. H.B. Tuckey, head of the department, and his colleague Dr. S.H. Wittwer. The lab is meticulously clean. The two men are yielding water misters containing solutions of the radioactive isotopes of known elemental nutrients such as Phosphorus and Potassium. They carefully begin spraying the solutions onto the leaves and stems of some rather unsuspecting plants and then they pause. Breaking the silent anticipation, Dr. Tuckey eventually steps forward. In his hand he holds a Geiger counter, and he begins waving it slowly around the plants. The counter is making that static like clicking noise that resembles fingernails tapping erratically on a countertop. A smile cautiously forms on his face as he realizes that the radioactive nutrients have been absorbed into the plants and are beginning to move around within them. The men quickly start documenting their breakthrough and history has been made.

Okay, so this might not be exactly how these events took place and spraying radioactive material with a handheld mister is most likely not safe. However, this is where the widespread interest in foliar feeding began. When Dr. Tuckey and his colleagues discovered that plant nutrients could be absorbed through a different part of the plant, besides just the roots, they in turn sparked new testing, new practices, and a new debate. Even now, 70 years later, the conversation continues concerning the effectiveness and benefits of foliar feeding.

The main point of absorption for elemental nutrients is through a plant’s roots. But sometimes the nutrients can become “locked up” with other elements in the soil rendering them unusable by the plants. There are many factors that can contribute to nutrients becoming immobile in the soil. If the fertilizer solution you are using is imbalanced or if its pH is too high or too low, the nutrients may not be absorbed by the plant. Poorly managed soils, damaged root-zones, excessive watering: all these situations can lead to lowered rates of absorption of vital plant nutrients. When a nutrient doesn’t seem to be working effectively through soil applications, using the foliar feeding method is a possible solution.

The leaves, and sometimes even the stems, of many plants are equipped with tiny, pore-like apparatuses called stomata. The word stomata comes from the Greek word ‘stoma’, meaning mouth and that is essentially how they work. Regulated by task specific cells, appropriately referred to as “guard cells”, a plant’s stoma will open and close at certain parts of the day. Stomata are essential for two main reasons. The first is to allow oxygen and water vapor to leave the plant (transpiration), which, in turn, cools the plant down and allows for more water and nutrients to flow from the roots to the leaf cells (translocation). The other is to provide a point of entry for carbon dioxide, from the air, to come into the leaf and make photosynthesis possible. Stomata can also act as a passageway for getting liquid plant nutrients into a plant. But, as is true with many aspects of life, timing is everything.

The opening and closing of stomata is directly affected by certain environmental conditions. As far as I can tell this is not an exact science yet, but some basic principles seem to be regarded as true. Stomata are generally open during periods of high light intensity. A reason for this could be that the high level of light is causing a high level of photosynthesis and the stomata are open to allow more carbon dioxide in, a fuel for the photosynthesis process. Stomata also open during times of high humidity, when water is plentiful, and plants don’t need to worry about conserving. However, stomata remain closed when conditions are exceedingly hot, above 80° Fahrenheit, or very dry. In these conditions a plant will keep its stomata closed to conserve any available water. If you plan on foliar feeding in the hot summer months, it is recommended to feed in the morning or early evening, when the sun is out but the weather is still relatively cool. Understanding when the window of opportunity is for open stomata to occur is only one part of the picture. The next part is figuring out how to get the nutrients in.

Successful foliar feeding is not as simple as just spraying the liquid on the leaves, it is a process that involves careful technique and a little bit of grace. The following is a small list of tips I’ve compiled to help you along the way.

Tips for Foliar Feeding
  • Avoid foliar feeding when temperatures are above 80° Fahrenheit. In the summer it’s best to spray either in the morning or early evening when temperatures are lower.
  • If possible, foliar feed when the weather is humid. 
  • Check the pH of your nutrient solution before spraying. The ideal pH is right around 7.0, which is referred to as a neutral pH.
  • Mix your solution at a more diluted rate than if you were root feeding. If the directions call for 1 oz. of fertilizer per gallon of water for regular feeding, use 1 tsp per gallon of water when foliar feeding. The smaller the particles are, the more likely they are to enter the stomata.
  • When spraying the solution, use a sprayer that creates the finest mist possible. This will ensure a better and more even spread of the solution on the leaf.
  • Use a wetting agent or surfactant. Water has a high surface tension rate, causing it to bead up when sprayed. Adding a wetting agent will lower the water’s surface tension allowing it to thin and spread out.
  • Spray both the tops and bottoms of the leaf, until they are completely covered, and excess solution runs off. On most plants the stomata are on the underside of a leaf but at times they reside on the top. So, just in case, spray both sides.
Possibilities & Realities

A trend that has been occurring in the liquid fertilizer industry for some time now is to market foliar feeding as a simple fix for what may be a major problem. Many companies include language like, “maximizes plant health” or “increases yields” in their literature regarding foliar feeding. I remember reading an advertisement once that said, in so many words, that foliar feeding is effectively the best way to battle bad soils. At that point I took a step back and thought to myself, is it really? My feeling is that “bad soils” need to be carefully amended to obtain maximum plant growth. However, it is true that foliar feeding can achieve much higher nutrient absorption percentages than root feeding. But it is also true that nutrients absorbed through the stomata do not travel throughout the plant as extensively as nutrients absorbed through the roots do. Also, it is impossible to get significantly large amounts of nutrients through the stomata. Essential elements such as Nitrogen (N) and Phosphorus (P) are needed by plants in high quantities, levels that are only achievable through root entry. Minor elements, such as Iron (Fe) and Magnesium (Mg), are needed in smaller amounts that may be obtained through foliar feeding.

If your plant is showing signs of Iron deficiency, cut a leaf of the plant and dip half of it in the nutrient solution you plan on using. If, after a few hours, the symptoms begin to subside, go ahead, and use the solution on the entire plant. Another element that can become immobile in the soil and may be of benefit in foliar feeding is Calcium (Ca). Using Calcium in a foliar treatment can help battle blossom end rot in tomatoes and peppers. Foliar feeding can be an effective way of supplying a plant with micronutrients and as a short-term solution to many different nutrient deficiencies. However, if you are experiencing the same nutrient deficiencies on a consistent basis, foliar feeding may not be the answer. Foliar feeding is usually more of a temporary fix instead of a solution to a problem, a fix that can be labor intensive and at times can become rather expensive, especially when used on a large scale.

I’ve always believed that healthy plants come from healthy soils. Properly amending the soil in your garden should be your first step. Perhaps get your soil tested to see what it is lacking or what there is too much of. If minor nutrient issues arise along the way or if you just want to give your plants a little boost, foliar feeding, when done correctly, can be an effective addition to your gardening repertoire.

Kyle Ladenburger is an avid indoor and outdoor gardener.

Related Articles & Free Email Newsletter Sign Up

All About Organic Fertilizer

Calcium is the Forgotten Fertilizer

How to Amend Soil and Mulch with Organic Matter

Shop for High Quality CBD Products

Subscribe to our Free Email Newsletter

Comment here